Wayne Dalton offers two types of garage door openers: wall and ceiling mount. The innovative wall mount opener eliminates the need for belts and chains, which clutter up your garage's ceiling. These are called iDrive opener opener and are designed to work with Wayne Dalton garage doors. They are the technologically most developed opener on the market today. It sticks to your garage's wall, right above the door. The iDriveWill kick-off is likely a torsion system, which both cut and and doors. It also has several safety features that you can not find regular garage doors.
During the installation of iDrive garage door opener you will still need cable or cable reel Snubber faults. This will be necessary to keep balanced the door. It will prevent the door from unspooling, if it detects an obstacle. The iDrive garage opener operates at a frequency of 372 MHz and are not installed directly above the door's center. It can be anywhere along the torqueMASTER tube, you have just to make sure that enough to pull the cord hanging from at least 6 feet above the ground. The iDrive opener comes with a power cord that is 6 meters long, but 15-foot extender cables are also available.
The iDrive garage door opener does not have any width restrictions, but your> Door can not be higher than 8 feet and must weigh under 225 kilograms. When you first install the opener garage you need to test to run the installation routine, whether it is working properly.
0 ความคิดเห็น:
แสดงความคิดเห็น