Aluminum sliding doors are in different rooms of a building. This could be used as a terrace or patio doors to the garden. Other places could be on the first floor leads to the balcony of a family room on the first floor or in the bedroom. There are various types are used, one side or other solid or two sliding doors and sliding walls and a solid. The rooms and size of the opening determines which type to use. This determines also be set to the glazing.
If you are ready to fix an aluminum sliding> Door, either by replacement or new, is the first opening. Make sure that all the rails, rollers are glazed so far. Line of the opening with smooth plaster and check walls, floor and above. Make sure corners are square, solder post, whereas the upper and lower level. Attach the context of the work of screws into the revealed and poles. Hacking at the bottom of the frame for easy cut-outs it flush with floor.
After the aluminum sliding door is assembled in preparation sitean integral part. Take the glass and the frame to tie it while inserting the rubber coating. Push the panel and screw it firmly into the frame. Start sliding assembly and update glazing remains, place the rolls and press into the handlebar. Let's roll the panel on the fixed side. Screw the wheels are, by upward or downward. Clean debris on the handlebar and remove dust.
Now that aluminum sliding doors are fitted, correct positioning of each panel. Make sure that the fixedOn the outer panel is a handle bar and sliding doors on the inside. This will prevent dryness during windy days. Add the toppings on the slots provided to stop shaking at the windy days or at the opening. Add the lock and test the latch mechanism when inside and outside the room. Attach the alarm system when moving to the panel and the framework provided, then clean the door.
0 ความคิดเห็น:
แสดงความคิดเห็น